Skip to main content
#
 
Wednesday, May 20 2015

 

 

This carbon fiber boom will be fitted to a custom 18m racing carbon spreaderless rotating wing mast which is nearing completion. Both mast and boom are dressed in clear-finished carbon for maximum appeal. The boom was resin-infused using ATL Composites' Kinetix epoxy infusion system for superior strength. A split female mould was made for the external shape of the boom and then a secondary mould was required to produce the internal box-section spar. The boom is designed to catch and house the mainsail when dropped. The sails will be supplied by Doyle Sails from the Sunshine Coast Qld and will be state of the art racing sails.

The owner is hoping to have the rig stepped next month.

Posted by: AT 04:20 pm   |  Permalink   |  0 Comments  |  Email
Comments:

Post comment
Name
 *
Email Address

Message
(max 750 characters)
*
* Required Fields
Note: All comments are subject to approval. Your comment will not appear until it has been approved.

Boat Designs and Kits | Spirited News 

POWER-SAIL
Stow-Away
CrossOver

CONTACT

rss feedemail usour twitterour facebook page

P: (+61) 02 4981 8288
 

Disclaimer  Copyright © 2013 Spirited Designs. All Rights Reserved.