#
 
Wednesday, 31 January 2018

This 8.5m Stow Away project is being built in New Zealand and is now well underway. This is a DuFlex balsa kit with some customised areas for the owner. The project started in September last year and the builders have made good progress since then.

This design is part of the Stow Away range which is a power-sailer concept set on semi-displacement hulls. The hulls are extremely efficient for both sail or power performance with a good beam to length ratio. The semi-displacement hulls have proven to be very comfortable at sea due to the fine entry hulls. This boat will be fitted with twin 50hp outboards and in flat water estimate to achieve a 15 to 20 knot cruise speed. Under sail this design should also perform well with an estimated average cruise speed of 8 knots. With a 4m beam this boat will fit into a standard monohull marina berth. Internally the design has full headroom throughout due to a wider cabin design that creates the headroom in the hulls. 

For more information on this design you can see it on the following link here

Below shows the majority of the panels joined

Below one of the hulls assembled and ready for taping

Current stage shown below with the decks being fitted 

 

Posted by: Spirited Designs AT 09:29 am   |  Permalink   |  0 Comments  |  Email
Comments:

Post comment
Name
 *
Email Address

Message
(max 750 characters)
*
Verify image below
* Required Fields
Note: All comments are subject to approval. Your comment will not appear until it has been approved.

Boat Designs and Kits | Spirited News 

POWER-SAIL
Stow-Away
CrossOver

CONTACT

P: (+61) 02 4981 8288
 

Disclaimer  Copyright © 2013 Spirited Designs. All Rights Reserved.