We received a couple of photos of the 3.2m Ripple design being built in Victoria and progress is good. At the time the boat was
primed and nearing painting stage, the owners are hoping to have it launched for Christmas. 

The three 4.2m Ripple Tenders were launched recently and look great, early reports are good with good performance and handling.
We are waiting for more feedback and detailed performance figures which we will post when available. 

All three tenders were built from a DuFlex Balsa kit and are set up with an offset steering console to Starboard. The owners specifically chose DuFlex as the building material for its lightweight and strong characterisitics. One of these boats will be stored on the rood of the mothership. 

The owners have done a beautiful job of finishing with all three boats fitted and finished identically.

Steve Middendorf is making good progress on his Spirited 230 project and is hoping to launch in the next 6 weeks.  

Close to painting stage with all structural work completed and faired, this boat is set up for relative extended cruising with most amenities and cruising features such as good solar charging, large top loading built in fridge and long range fuel tanks.

Steve has even gone to the extent of building his own composite bow rails which look great!

Powered by 2x 70hp 4 stroke outboard engines and we look forward to the performance report. Steve's workmanship is meticulous with good attention to detail. We expect the painted finish will present accordingly. 

We will keep you up to date close to launching.
 

We recently dropped in to see Chris Downing who is building his Spirited 380. This project is progressing well and Chris is hoping to have her launched early in the new year of 2014.

We were commissioned to do a customised interior layout for Chris which comprised of a larger L-shaped seating area in the saloon and a separate vanity area forward of the aft saloon bulkhead. This area works well and provides good storage on the outboard side of the vanity.

The new layout also included a workshop area in the starboard aft cabin which has a fold down section to create a double bunk. This area is large enough for him to store his bicycle. Chris plans to live aboard permanently and is looking forward to his new lifestyle.

We will let you know of how Chris progresses closer to his launch date.

3.2m Ripple Tender project underway in Victoria.
 
The photos below show the Duflex Airex Foam kit recently assembled. Brian and Denise Jones are doing a very neat job, well done!

They are extremely impressed with their kit and wrote a few words on their work experience todate, please click here to read further.

Pictured above are three 4.2m Ripple Tenders being built in Hervey Bay. These are all built from DuFlex Balsa kits and set up with a steering console on the starboard side. The standard configuration for this design has the console in the centre of the boat. These will be launched soon, we will let everyone know more on this design as it progresses.
 

A recent Spirited 480 order has been produced with a special client request of 100kg density AIREX Foam hulls. His hull components utilise the foam below the waterline with the remainder of the structure in end-grain balsa. As per our process, the hull and deck components have been resin infused to maximum strength.
 
The client has been enthusiastically working on his furniture which was custom designed to the clients requirements along with some other areas. Some of these changes include an extended roof over the cockpit , a custom all weather raised steering station set to starboard and a custom daybed incorporated into the cockpit.
 
We can report that following our recent visit, there is a high level of attention to detail in the work done todate. In the coming weeks assembly will take effect, we'll keep you posted on it's progress.

Below are some images of a project in Duflex Airex foam panel underway in Western Australia.The Spirited Ripple Tenders are a popular choice with this Duflex foam option producing one of the lightest tenders available.

For those of you interested in this range of designs, we have just introduced a 3.2m model. Study Plans are available.

It has been exciting to see this design come to life. She looks great!

Congratulations to Miguel & family for the launch of 'Carmen Leopoldo' in Argentina.

For more information on this design please visit our Designs